• 1 bidirectional CANbus port
• 3 frequency output signals
• 3 on/off output signals
• 2 switch inputs
• Protocol Support for J1939, Protocol Support for CANopen via Layer2 and proprietary protocols
• Full configurable, without programming
• Robust design, IP67
• Basic configuration capacity
• Sleep mode, Wake on CANbus message
• 10-60 volt supply.

Description

This powerfull device generates 3 frequency signals and 3 on/off signals based on CANbus data or switch signals.

• Connect  digital I/O to the CANbus
• Transform CANbus signals to drive TTL ports of a PLC
• Max 2 outputs can be configured for 4-5000 Hz Output
• Max 2 outputs can be configured for 1-500 Hz Output
• Max 6 outputs can be digital on/off signals

Two digital inputs are available to detect on/off signals from switches.

The 6 digital output device converts and processes the CANbus messages and switch signals. The 6 digital output device converts and processes these signals to drive the outputs.

The device is equipped with a 15-pole Mate-N-Loc connector for easy installation and setup.The device can be configured via the iConfigure software. With the basic configuration capacity you can configure signal processes inside the device to perform any control and process task you can imagine. Event driven situations can be handled up to a 100ths of a second, and with the non volatile storage, data values can be stored.

Benefits

• Accurate driving digital outputs
• Easy to configure and to use
• User defined routines for signal conditioning
• Wide application range
• Harsh environment build
• IP67 casing and connectors
• E-certified and GOST-R