• 1 bidirectional CANbus port
• 2 inputs for resistance based sensors
• Protocol Support for J1939, Protocol Support for CANopen via Layer2 and proprietary protocols
• Full configurable, without programming
• Robust design, IP67
• Basic configuration capacity
• Sleep mode, Wake on CANbus message
• 10-60 volt supply.

Description:

The Resistance Sensor Device is an electronic device to connect 2 resistance based signals to CANbus.

Examples for resistance based sensors are:

• Temperature PT 100 / PT1000
• Temperature NTC /PTC
• Potentiometer /  Fuel gauges

The Resistance Sensor Device converts and processes these signals to CANbus messages. The device can be configured via the iConfigure software. With the basic configuration capacity you can configure processes inside the device to perform any control and process task you can imagine. Event driven situations can be handled up to a 100ths of a second, and with the non volatile storage, data values can be stored. 

Sensors are connected via the Squarell sensor cables. Sensor supply is integrated in the cable and with iConfigure the voltage is set during configuration. Sensors can be purchased from any supplier, if required we can advise you in selecting the right sensor type.

Smart sensor technology.

The sensor cables can be equipped with a 1-wire chip where configuration data and physical specs of the sensor are stored. The Resistance Sensor Device reads this information and adapts the signal conversion automatically. This makes an "connect and go" installation possible. Squarell has several ready to use sensor cables for temperature measurement with smart sensor technology. Squarell can program your sensor characteristics in the sensor cables on request.

Benefits:

• Accurate measurement
• Easy to configure and to use
• User defined routines for signal conditioning
• Wide application range
• Optional Smart sensor technology
• Harsh environment build
• IP67 casing and connectors
• E-certified and GOST-R