• 1 bidirectional CANbus port
• 6 power outputs
• Up to 9 amps PWM
• Protocol Support for J1939, Protocol Support for CANopen via Layer2 and proprietary protocols
• Full configurable, without programming
• Robust design, IP67
• Basic configuration capacity
• Sleep mode, Wake on CANbus message
• 10-60 volt supply

Description

The 6 Power output device is an electronic device to drive power actuators like:

• Lamps
• Solenoids
• Hydraulic valves
• Relays

Two digital inputs are available to detect on/off signals from switches.

The 6 output device converts and processes the CANbus messages and switch signals. The 6 output device converts and processes these signals to drive the outputs. The output type is PWM with configurable slopes.

With the high output capability you can drive up to 18 Amps in total. The device is equipped with a 15-pole Mate-N-Loc connector for easy installation and setup.The device can be configured via the iConfigure software. With the basic configuration capacity you can configure signal processes inside the device to perform any control and process task you can imagine. Event driven situations can be handled up to a 100ths of a second, and with the non volatile storage, data values can be stored.

Benefits

• Accurate driving power outputs
• Easy to configure and to use
• User defined routines for signal conditioning
• Wide application range
• Harsh environment build
• IP67 casing and connectors
• E-certified and GOST-R