• 1 bidirectional  ISO11898 CANbus 10kbit-1Mbit
• 1 CANdiode port (protected read only)
• Protocol Support for J1939, Protocol Support for CANopen via Layer2 and proprietary protocols
• 1 Configurable K-line port
• Protocol support for KWP2000, OBD, CARB and proprietary
• 1 RS232 port
• Full configurable, without programming
• Robust design, IP67
• Extended configuration capacity
• Sleep mode, Wake on CANbus message
• 10-60 volt supply.

The K-line to CAN is an advanced RS232 to CAN and K-line (OBD) interface. This device can be connected to CANbus systems according to the ISO 11898 (5 volts) systems and OBD systems. All ports are optical isolated 

The CANdiode port is an optical isolated  CANbus port designed to read CANbus data from CANbus systems without interfering with the electrical signal. The port only reads and can not send data or influence the signal levels.

The  bi-directional CANbus port is a full functional port. The K-line port is capable of reading and sending K-line data.. The bidirectional RS232 port has extended capabilities like binary and ASCII support, checksum, handshake etc. The device can be configured via the iConfigure software. With the extended configuration capacity you can configure large and complex processes inside the device to perform any control and process task you can imagine.. Complex event driven situations can be handled up to a 100ths of a second, and with the non volatile storage, data values can be stored. 

Benefits:

• Create applications for CANbus. K-line (OBD) and RS232
• Create applications without influencing existing CANbus systems
• Easy to configure and to use
• Wide application range
• Harsh environment build
• IP67 casing and connectors
• E-certified and GOST-R