• 1 bidirectional CANbus port
• Powerline communications
• ISO11898 CANbus 10kbit-1Mbit
• Protocol Support for J1939, Protocol Support for CANopen via Layer2 and proprietary protocols
• Full configurable, without programming
• Real Time Clock
• Robust design, IP67
• Sleep mode, Wake on CANbus message
• Extended configuration capacity
• 10-60 volt supply.

Description

The iBridge is a power line communications device. This device connects on one side to CANbus, on the other side to power lines. The CANbus signal is send over the power lines to another power line device like iBridge or TrailerBridge).

The power lines do not have to be powered, just connections over electrical conductors is possible.

The advanced technology gives you a stabile and high performing connection. Depending on the quality of the wiring, power lines can be longer than 40 meters.

This device can be connected to CANbus systems according to the ISO 11898 (5 volts) systems. The 2 bi-directional CANbus port is optical isolated.. With the extended configuration capacity you can configure simple processes inside the device to perform control and process tasks. Event driven situations can be handled up to a 100ths of a second, and with the non volatile storage, a limited number of data values can be stored. Routines for paring with other power line devices, identification and transmission of selected CANbus messages is possible.

Benefits

• Designed for truck and trailer connections and agricultural systems
• CANbus extension in existing systems and constructions
• No need for rewiring
• Wide application range
• Harsh environment build
• Connect and Go solution
• Short time to pair (< 10 seconds)
• IP67 casing and connectors