With iConfigure you can configure and service the CANbus products from Squarell. The software program protects you from complex operations and makes CANbus networks easy to configure and maintain. You need just one program to execute all necessary service tasks.
Configure, Install, Service
Just hook up the CANbus to your PC. iConfigure retrieves the configuration and displays it on your screen. Read the service log and check if there are any problems reported. Reconfigure and store the new configuration to the devices. Your network is ready for operation.
Squarell products for CANbus are extended and improved continuous. You can install firmware upgrades for the Squarell devices with iUpdate. When you have multiple sites, Squarell products make an easy service possible. As configuration data is stored in the Squarell devices, iConfigure can be used on any site. No central administration or local databases are required.
iConfigure:
- Configure Squarell products
- Retrieve network configurations
- Display and monitor CANbus and J1708 networks
- Simulate CANbus and J1708 systems
- Set the device address of the Squarell devices
- Retrieve configurations from operational devices
- Protect configurations with password
iService:
- Set the CANbus speed of the Squarell devices
- Set the device address of the Squarell devices
- Device diagnoses
iUpdate:
Upload new firmware in an automatic 1 step routine.
PC requirements
The iConfigure software program runs on the Microsoft Windows platform. You need Windows ME, Windows NT sp4, Windows 2000 SP2 or Windows XP and a PC with a serial and an USB port. The program requires 5 MB of disk space.
